AANDERAA Profiling Current Meter and Wave
Brand: AANDERAA
Category: PROFILING CURRENT METER + WAVE
Brand: AANDERAA
Category: PROFILING CURRENT METER + WAVE
View Details
Quantity: In Stock
Selected variant:
Selected variant:
The SeaGuardII DCP Wave is a 600kHz Doppler Current Profiler able to measure directional wave parameters and currents from a bottom mounted installation.
The Acoustic Wave software 5759 used by the DCPS implements unique features to improve the wave measurement accuracy by optimizing the signal to noise ratio.
Maximum deployment depth is 40m in normal scatter conditions. The Profiling Current Meter and Waveis available as a self-recording instrument. It can be easily integrated into a real-time system offering reliable two-way communication.
Redundant wave measurement for QA/QC can be implemented by adding the wave and tide sensor 5218.
Adaptive pulse technology automatically optimizes wave measurement accuracy. The transmission pulse is automatically adapted to the current sea conditions to provide best measurement achievable; a low noise broadband mode is used for smaller waves, an extended range broadband mode used for medium range waves and a narrowband mode is applied for higher waves.
Specifications
Profiling Current Meter and Wave: The optimal solution to measure directional waves, currents and water quality in one instrument
Real-time or self-recording with on-board processing of current and wave parameters from a bottom installation
Independent measurement of waves and currents with flexible set-up
A wide range of parameters available using Aanderaa plug and play smart sensors
Easy integration of third-party sensors
Adaptive pulse technology optimizing wave measurement accuracy
Innovative technology to ensure accurate low noise wave measurement
Covers the complete wave range (0.2m to 20m) without sacrificing accuracy
Automatically switches between two broadbands and one narrowband mode depending on wave height
Samples waves at 2Hz or 4Hz with a configurable integration interval from 5 to 30 minutes
Field proven and validated data
Comparison and validation using three other methods for wave measurement, including surface buoys
Possibility to integrate a wave pressure based sensor for redundant measurement and quality assurance
Most efficient current and wave profiler on the market offering ease of use and proven data quality
Maximum deployment depth of 40m
SeaGuardII yearly service and data downlaod