PULSAR MEASUREMENT PTFM 6.1 PORTABLE TRANSIT TIME FLOW METER
Brand: PULSAR MEASUREMENT
Category:
PULSAR
Brand: PULSAR MEASUREMENT
View Details
Quantity: In Stock
Selected variant:
Selected variant:
THE RIGHT METER FOR:
General Specifications | |
---|---|
Spec name: | Description: |
Operating Parameters |
For clean fluids in full pipes, with typically less than 2% by-volume concentration of solids or bubbles. Also suitable for
wastewater or sludge flows with low solids concentration
|
Configuration | Built-in 5-button keypad interface with English, French, and Spanish menu language selection |
Electronics Enclosure | IP67 when transducer cables connected, aluminum enclosure with silicone end covers |
Accuracy |
• ±1% of reading or ±0.0046 m/s (±1.5 ft/s), whichever is greater
• Repeatability & Linearity: ±0.25%
|
Power Input |
• Built-in rechargeable lithium polymer battery for up to 15 hours continuous operation
• External mains to USB-C charger with 100-240V AC, 50-60Hz, 0.6A input; and 5.0V DC, 3A, 15W output
|
Display | Color TFT LCD display, IPS type, 2.8” screen size, 320 x 240 resolution, 500 NITS brightness, super wide view |
Outputs | Log files, daily log files, parameter settings files, and waveform capture files via USB-C flash drive (included) |
Data Logger |
12 million point capacity, configurable for velocity or flow rate, date and time stamped, configurable format for Greyline
Logger Software (LG2) or CSV, available intervals of 10 s, 30 s, 1 min, 2 min, 5 min, 10 min, 15 min, 30 min, and 1 hr
|
PC Software | Free Greyline Logger Software for Windows. For display, manipulation, analysis, and exporting of data. |
Operating Temp. (Electronics) | -20 °C to +60 °C (-5 °F to +140 °F) |
Carry Case | IP67, with protective molded foam, with room for all transducer sizes and installation hardware |
Approximate Shipping Weight | 5.5 kg (12 lbs) |
Language Selection | English, French, Spanish |
Approvals | CE |
TRANSDUCER SPECIFICATIONS | |
---|---|
Spec name: | Description: |
Pipe Diameter,
Nominal
|
SE16A: Recommended for 15 mm to 40 mm (0.5 in to 1.5 in), Suitable for 15 mm to 150 mm (0.5 in to 6 in)
SE16B: Recommended for 50 mm to 250 mm (2 in to 10 in), Suitable for 50 mm to 1,200 mm (2 in to 48 in)
SE16C: Recommended for 300 mm to 1,200 mm (12 in to 48 in), Suitable for 100 mm to 1,200 mm (4 in to 48 in)
|
Pipe Materials: |
Any metal or plastic sonic conducting material including carbon steel, stainless steel, ductile iron, concrete-lined ductile
iron, cast iron, PVC, HDPE, PVDF, fiberglass, copper, brass, aluminum, and pipes with bonded liners including epoxy,
rubber, and Teflon
|
Flow Velocity | ±0.03 m/s to 12.2 m/s (±0.1 ft/s to 40 ft/s) typical |
Operating Frequency |
SE16A: 2.56 MHz
SE16B: 1.28 MHz
SE16C: 640 kHz
|
Operating
Temperature
|
-40 °C to +150 °C (-40 °F to +300 °F) |
Transducer
Mounting Kit
|
SE16A: Includes stainless steel track with pipe clamps, built-in ruler, and coupling tape.
SE16B: Includes set of stainless steel transducer brackets, clamps, alignment bar, and coupling tape.
SE16C: Includes set of stainless steel transducer brackets, clamps, alignment bar with built-in ruler, and
coupling tape.
|
Transducer Cable |
1 pair, triaxial, 3.4 m (12 ft) with waterproof plug & socket connector for electronics, and BNC connector with seal jacket
for transducers
|
Ingress Protection |
IP65 with seal jackets installed. IP67 when installed with Super Lube synthetic grease inside BNC connectors and seal
jackets.
|
Specifications
PTFM 6.1 PORTABLE TRANSIT TIME FLOW METER: .
How It Works: Transit Time Flow
Untitled